ixwebhosting 恢复还要30分钟CP9 & CP10 Maintenance Incident updates

dangji · 发表于 2010-10-15 12:56:08

Incident Updates
10:30PM EST: Preparing for maintenance
11:00PM EST: Maintenance Started
11:30PM EST: CP9 & CP10 rebooting
12:00AM EST: Servers have not crashed and new blades are in recovery.
12:30AM EST: New blades are still running recovery. ETA 30 minutes. Looks like CP7 is also being affected by this hardware change.
1:00AM EST: Booting each server - no data loss or other issues, but will take about 30 minutes more depending on your server.

美国东部时间 -5，现在冬令时，和中国 UTC +8, 差12个小时，现在大陆快15日13点

耗时近3个小时了

[ 本帖最后由 dangji 于 2010-10-15 12:57 PM 编辑 ]

gypworks526 · 发表于 2010-10-15 13:02:38

95147 · 发表于 2010-10-15 13:08:02

这是在干什么啊？

dangji · 发表于 2010-10-15 13:08:36

好像是整合新的刀片式服务器

[ 本帖最后由 dangji 于 2010-10-15 01:10 PM 编辑 ]

hwlnba · 发表于 2010-10-15 13:25:46

刀片式服务器是一种HAHD（High Availability High Density，高可用高密度）的低成本服务器平台，是专门为特殊应用行业和高密度计算机环境设计的，其中每一块“刀片”实际上就是一块系统母板，类似于一个个独立的服务器。

kfsjp · 发表于 2010-10-15 13:27:30

是吗？那这样速度会快点吗

开心私塾 · 发表于 2010-10-15 13:30:00

不知道期待会快点吧。呵呵

maniwan · 发表于 2010-10-15 13:39:38

希望快点了，不然ix就等着x吧

555888 · 发表于 2010-10-15 13:39:57

我操他奶奶，还没恢复

dangji · 发表于 2010-10-15 13:40:28

1:30AM EST: There was a delay. We are in the process of reconfiguring the new blades for performance increases. This is causing a delay. Servers are ready to reboot.

[其他] ixwebhosting 恢复还要30分钟CP9 & CP10 Maintenance Incident updates